Osc 2 can modulate the Osc 1 with true FM.

Various filter types including LP and HP.

2 analog oscillators with amp envelope, SAW, SQUARE, TRIANGLE, SINE and NOISE waveforms.Mixer with level, pan, mute, solo and AUX1 and AUX2 levelsĪudioSauna's virtual analog synth is a classic two oscillator subtractive synthesizer.Sequencer with pattern arrange and piano roll modes.

Use your computer's keyboard to record melodies with AudioSauna.

Save and open songs and export song as audio file.

It enables using several advanced polyphonic synthesizers, samplers and live effects in real-time in the browser. At the time of review, all components must be installed and fully functional.AudioSauna is a full-featured audio workstation with an easy-to-use and straightforward user interface. – Loxone Water Sensors in appropriate roomsĪ Loxone Partner Consultant will review each project you submit for the Smart Home Bonus. – Loxone Smoke Detector in designated rooms* – Loxone Touch/Touch Pure/Touch Surface for control in each room

– Loxone Valve Actuators for zoned heating control for each room/zone – The shading should be controlled either by a Geiger motor, our Shading Actuator or our Relay Extension – A Motion Sensor Tree in each room (unless using our Ceiling Light with inbuilt motion sensor) – A minimum of 80% of the lighting should be Loxone Tree. The following hardware must be included in a Loxone Smart Home project: To qualify, the following functions must be commissioned: The 3% bonus will be in the form of a credit note on your account. The Smart Home Bonus is available on projects where the components were purchased after. Have you commissioned a true Loxone Smart Home? If so, you’ll effectively receive an addition 3% discount off the list price of all the Loxone components you’ve used in this project. For example, a value of 20% means that the outputs are on for 20% of the period and off for 80%. Phase outputs (L1-3) are pulse-width modulated by the controller to emulate an analog value. If the sauna heater requires only one phase, use (L1). The output (So) and the phase outputs (L1-3) are used to connect the respective outputs. The sauna temperature sensor is linked to input (ϑc). Please ensure you follow the relevant Safety and Legal Regulations for your respective Country. In Addition, the Sauna module can be operated via the Web Interface/App and, therefore, remotely. There is also a Safety Shutdown, if you forget to switch off the heater. Also integrated in the block is a Sand Timer function, Airing, and Drying. (Switching of the Heating Elements, as well as Analogue control via 0-10V Signal). All common sauna stoves can be controlled. Using this block, a Sauna can be Automated Optimally. Parameter is only displayed if phase outputs (L2) and (元) are used. If necessary, change the value in small steps to adapt the control to the sauna. If the value is decreased, the temperature control responds slower, if it is increased, it responds faster. Specifies the PWM period for the phase outputs (L1-3).Ĭontroller gain for the PWM modulated output. If input (P) is used, the time starts to run when presence is no longer detected. The sauna is automatically switched off at the set time. If exceeded, all outputs are switched off, except for the output (Ssd). The temperature required to start the fan when in drying phase.įan duration after reaching the drying phase temperature (Dryϑ). Pulse when target temperature is reached.ĭeviation current temperature to seat temperature (if the input current bench temperature (ϑb) is not used). Pulse when the current temperature exceeds the value set in parameter (Ssdϑ). On as long as drying and airing are active. On as long as sauna and drying phase are active. (e.g Child lock, cleaning)Ĭontrol via user interface is still possible. The name of the connected sensor is used in the user interface.ĭisables inputs (Tg), (Fan), (St) when On. If no presence is detected, the sauna will shutdown automatically after the duration set in parameter (Ssdt). If connected, the bench temperature is used as current temperature. The door state is only used for display in the user interface! The fan can only be switched on when the sauna is On.Īctivates the sand timer for the duration set in parameter (Std).Įach subsequent pulse on the input restarts the timer. Toggles between Sauna On, Heating, Drying, Airing, Sauna Off.

With this Function Block a sauna can be optimally automated.Īll standard Sauna heaters can be controlled (switching of the heating elements, as well as analog control via 0-10 V signal).Īlso integrated in the module is an hourglass function, fan and post-drying, as well as a safety shutdown, if you forget to switch off the heater.

Audiosauna competitors